JAMET

Journal of Advanced Marine Engineering and Technology

pISSN 2234-7925

eISSN 2765-4796

Code of Research Ethics

Username(ID) Password Login

Forgot
my username Forgot
my password Register

Sorry.

You are not permitted to access the full text of articles.

If you have any questions about permissions,

please contact the Society.

죄송합니다.

회원님은 논문 이용 권한이 없습니다.

권한 관련 문의는 학회로 부탁 드립니다.

Recently Published

Journal of Advanced Marine Engineering and Technology - Vol. 49, No. 6

1. p. 417 Design and scenario comparison study of an amine solvent-based carbon-dioxide-capture process for ships

Sun-Tack Jung, Tae-Woo Lim, Yong-Seok Choi
DOI: https://doi.org/10.5916/jamet.2025.49.6.417

2. p. 424 Thermodynamic analysis of supercritical CO₂ power cycle for waste heat recovery of ammonia gas turbine

Jun-Seong Kim, Do-Yeop Kim, You-Taek Kim
DOI: https://doi.org/10.5916/jamet.2025.49.6.424

3. p. 433 Analysis of ammonia boil off gas treatment in fuel storage systems

Da-Hye Hwang, Yong-Seok Choi, Tae-Woo Lim
DOI: https://doi.org/10.5916/jamet.2025.49.6.433

4. p. 441 Reliability evaluation of marine flowmeters and transmitters under cryogenic hydrogen-storage conditions based on FMEA and QFD

Ji-Min Lee, Yang-Gon Kim
DOI: https://doi.org/10.5916/jamet.2025.49.6.441

5. p. 450 Experimental investigation of bonding characteristics in composite bulletproof panels for small hulls

Kyeong-Soo Kim, Yoeng-Gwan Lee, Jong-Wook Lee, Ka-Young Lee, Tae-Wan Kim
DOI: https://doi.org/10.5916/jamet.2025.49.6.450

6. p. 457 Analyzing cut-edge corrosion in hot dip galvanized and Zn-Al-Mg alloy using image processing

Yeonwon Kim, Sang-Du Yun, Inyoung Park, Beomsoo Kim, Jeonghyeon Yang
DOI: https://doi.org/10.5916/jamet.2025.49.6.457

7. p. 463 Process design of multi-stage hot forging for manufacturing tripod housing

Kyung-Hun Lee
DOI: https://doi.org/10.5916/jamet.2025.49.6.463

8. p. 471 Cryogenic rolling shear characteristics of birch plywood for LNG cargo containment systems

Hee-Tae Kim, Ki-Young Sung, Jeong-Hyeon Kim, Jae-Myung Lee
DOI: https://doi.org/10.5916/jamet.2025.49.6.471

9. p. 480 An approach for anomaly detection of motor rotating shaft alignment using deep learning

Jae-Hun Kim, Chul-Sun Park
DOI: https://doi.org/10.5916/jamet.2025.49.6.480

10. p. 489 Corrosion behavior analysis of high-corrosion-resistant Zn-flake coatings

Yeonwon Kim, Kyunghwang Lee, Jeonghyeon Yang
DOI: https://doi.org/10.5916/jamet.2025.49.6.489

11. p. 496 Comparison of Corrosion Resistance Characteristics of Zn-Al-Mg Alloy Steel according to Cutting Methods

Beomsoo Kim, Kyunghwang Lee, Yeonwon Kim, Jeonghyeon Yang
DOI: https://doi.org/10.5916/jamet.2025.49.6.496

12. p. 501 1D AMESIM model development of ship mechanical injector with input flow rate

Firmansyah Rendra Dwi, Sejun Lee, Min Kim, Ocktaeck Lim
DOI: https://doi.org/10.5916/jamet.2025.49.6.501

13. p. 510 A simplified method to predict full-scale ship performance in pack ice fields

Seong-Yeob Jeong, Eun-Jin Oh
DOI: https://doi.org/10.5916/jamet.2025.49.6.510

14. p. 518 Implementation of a practical tennis training algorithm based on random characteristics for enhancing immersion

Pil Woo Heo
DOI: https://doi.org/10.5916/jamet.2025.49.6.518

15. p. 525 Integral sliding mode control for ship main cooling systems

Tae-youl Jeon, Sun-tae Kim, Young-chan Lee
DOI: https://doi.org/10.5916/jamet.2025.49.6.525

16. p. 536 Maneuverability measure of hovering-type underwater vehicles using robotic manipulability: A preliminary study

Jin-Kyu Choi, Hayato Kondo, Shuhei Nishida
DOI: https://doi.org/10.5916/jamet.2025.49.6.536

17. p. 543 Characteristics of tennis stroke and trajectory of the ball hit by a player using an accelerometer

Pil Woo Heo
DOI: https://doi.org/10.5916/jamet.2025.49.6.543

18. p. 551 Free-form document detection and ratio-preserving rectification

Min-Jae Kim, Yoon-Sang Han, Dong-Hoan Seo
DOI: https://doi.org/10.5916/jamet.2025.49.6.551

19. p. 560 Calibration of low-grade inertial measurement unit sensors using real-coded genetic algorithms

Minh Thao Pham, Kyoung-Kuk Yoon
DOI: https://doi.org/10.5916/jamet.2025.49.6.560

20. p. 570 An adaptive pressure genetic algorithm with a long immigration strategy based on directional selection for estimating low-cost inertial measurement unit errors

Minh Thao Pham, Kyoung-Kuk Yoon
DOI: https://doi.org/10.5916/jamet.2025.49.6.570

21. p. 581 Offset-aware transformer for continuous Wi-Fi fingerprinting localization

Min-Jae Kim, Yoon-Sang Han, Dong-Hoan Seo
DOI: https://doi.org/10.5916/jamet.2025.49.6.581

22. p. 590 Comparison of dynamic structural responses of blast walls subjected to hydrogen blast loads

Hyun-Ho Lee, Dong-Kyeong Yang, Jung-Kwan Seo
DOI: https://doi.org/10.5916/jamet.2025.49.6.591

23. p. 602 Dispersion characteristics of liquefied natural gas in a fuel preparation room

Jinwoo Bae
DOI: https://doi.org/10.5916/jamet.2025.49.6.602

24. p. 610 Flooding probability of conventional small-sized fishing vessels using a stochastic approach

Jang-Hoon Pyun, Ji-Hoon Kim, Myung-Hyun Kim, Sung-Gon Ryu
DOI: https://doi.org/10.5916/jamet.2025.49.6.610

25. p. 619 Hybrid ship applications in maritime: A comprehensive review on technological advancements, environmental and economic analyses

Abdi Kükner
DOI: https://doi.org/10.5916/jamet.2025.49.6.619

26. p. 642 Legal institutionalization of risk management in aids to navigation placement: An analytical study on the implementation of IALA risk management tools

Naehyuk Yoo, Sang-Il Lee
DOI: https://doi.org/10.5916/jamet.2025.49.6.642

ⓒ The Korean Society of Marine Engineering
The Korean Society of Marine Engineering (KOSME) Room 433, Bldg C1, 727 Taejong-ro, Yeongdo-gu, Busan 49112, Korea
Tel : +82-51-405-1050(1054), Fax : +82-51-405-1125, E-mail: kosme@e-jamet.org